Thursday, September 22, 2011

Female Pattern Baldness

Female pattern baldness can be termed as a major problem for women. This disease makes women have baldness in a bit similar pattern as men have in male pattern baldness. It can start even in teenage.

What can be the causes of this female baldness?

There are various causal factors of female pattern baldness among women. The production of androgenetic hormones and its effect on hair follicles can be termed as the main reason.

Role of androgen - The male hormone androgen plays key role in female pattern baldness, as they do in male pattern baldness.

Adrenal glands and ovaries are the main sources of androgens in females. Androgens like dehydroepiandrosterone (DHEA) produced by the adrenal glands can be converted to testosterone by enzymes.

In females it is dehydroepiandrosterone (DHEA) from the adrenal glands that plays the key precursor of DHT. It needs conversion by both alpha 5 reductase enzymes and hydroxysteroid hydrogenase isomerase enzyme.

Genetic factor - Genes inherited from parents play a very important role in female pattern baldness. You may develop this problem if, suppose, your grandmother was suffering from it.

Alopecia Areata - Another cause of female baldness is Alopecia Areata. It causes a patchy hair loss from the scalp and sometimes eyebrows. And in this case the hair loss can be episodic and recurrent.

Traction alopecia - Traction alopecia also figures among the list of causes. It entails consistent traction pressure on hair follicles. One possible cause of traction alopecia is tight braiding.

Trichotillomania - The compulsive hair plucking called Trichotillomania also contributes to the cause of hair loss.

Telogen effluvium - Telogen effluvium also plays a causal factor in female baldness. It causes accelerated hair loss that may have hormonal, nutritional, drug-associated or stress-associated causes.

Post-pregnancy factor - The problem can also occur as post-pregnancy development. It is sometimes found to happen after the discontinuation of birth-control pills. The condition is often accompanied by other signs of hormonal imbalance including excess facial and body hair.

Female pattern hair loss characteristics

In female pattern baldness, the hair of the affected woman starts thinning over the top and front of the head. It is possible for any woman to face the problem. However, women generally suffer from this problem after their menopause.

On an average, women lose around 100-125 hairs per day. It is a normal condition. The condition is apparently serious when the hair loss frequency is higher.

The pattern of hair loss may vary from person to person. However, the hair loss patterns may include the following -

o Diffuse hair thinning over the entire scalp, often with more conspicuous thinning toward the back of the scalp.

o Diffuse hair thinning over the entire scalp, with more conspicuous thinning toward the front of the scalp without involving the frontal hairline.

o Diffuse hair thinning over the entire scalp, with more conspicuous thinning toward the front of the scalp, while involving and sometimes breaching the frontal hairline.

Women suffering from female pattern baldness tend to have miniaturizing hairs of varying diameters over all affected areas of the scalp. Hair miniaturizing is a feature of androgenetic alopecia. However, the condition may also be related to other causes. For example, in post-menopausal stage a woman's hair may experience miniaturization and become difficult to style.

Scandalli Accordion

Wednesday, September 21, 2011

Review Of Dan Zanger Chart Pattern - Does Dan Zanger's Chart Pattern Really Perform?

Review Of Dan Zanger's Chart Pattern Chart Pattern and Dan Zanger is not a system or method, but is an advisory and teaching service.

Dan is the world record holder for the largest percent change for a personal portfolio in a 12 month period of time, and an 18 month period of time in the history of the stock market, making Dan millions of dollars over the time period. This can be verified and has been audited, which is shown at the main Chart Pattern site

Dan first hit the media spotlight in December 2000 when he was featured in a Fortune Magazine article which you can read on the main site Dan is a technical stock analyst and focuses on the most explosive stocks in the stock market today.

He does an evening newsletter four times a week for active traders and proactive investors focusing on the most explosive stocks for long positions and when appropriate, for shorting.

If you want to be spoon fed trades from a real pro and learn at the same time, Dan is your guy. Dan encourages you to learn to do what he does, and teaches you in the process of giving you his trades. This guy is a world's record holder, enough said.

Be aware, if you only trade options, some of his trades are stocks only. My experience has been that most of the trades he gives do have options available.

You do need to do some thinking for yourself, and keep an eye on the market. Dan will be the first to tell you, that if a trade doesn't go as planned, you need to exit the market quickly to preserve your money.

Scandalli Accordion

Tuesday, September 20, 2011

Resize a Quilling Pattern - Three Simple Techniques to Make Any Design Work For You

Quilling patterns fall into two common groups: written patterns, which specify the paper strip lengths needed to create the various coils and scrolls used to complete the project as designed, and outlines of the finished design, similar to those found in coloring books, that the crafter fills in with various quilled shapes. Frequently, however, you'll find that the design, in its original form, is the wrong size for what you have in mind. You may need to reduce or enlarge it to make the finished quillwork fit your project space. Adjusting the size of your pattern for your own personal use is really quite simple once you know which technique to use when.

Adjust the paper strip length. If you have a written pattern, you can alter the lengths of the paper strips used to create the quills, thus making the finished quillwork larger or smaller than the original pattern. For example, if you want a finished piece of quillwork twice as large as the pattern, make quills with paper strips that are twice as long as specified. For a finished piece that is half the size of the pattern, reduce the quilling strip length by half. With some practice, you will discover the size of the paper strip that will give you the size quill you desire. Be sure to adjust all of the strips used for each type of coil or scroll to keep the finished quillwork proportional.

Resize the graphic file before printing. If you are using an outline pattern that is in digital form, simply resize the file to the desired height and width before printing. If you are using a printed picture, you can scan it first to turn it into a digital file and then resize it before printing a new smaller or larger version that you can use.

Use the grid method to make a scaled copy. This is an old-fashioned technique used mainly before the days of scanners and computers, but it can still come in handy if you have a pattern drawing and no modern tools are available. First, draw a grid resembling graph paper with squares approximately 1/8 inch over the original design. To enlarge the pattern, take a separate clean piece of paper and draw a grid with the same number of squares as those drawn on the original, but make the squares larger (1/4 inch would double the size of the pattern). Copy the outline of the design from the original pattern to the second piece of paper, drawing the pattern in square by square. Use this same procedure to reduce the original pattern, but make the squares on the second sheet correspondingly smaller.

There is no reason to shy away from a quilling pattern just because it isn't the exact size you need. Now that you know three great techniques for resizing your pattern you can make any quilling design work for you.

Scandalli Accordion

Sunday, September 18, 2011

Trend Reversal Patterns - Head-and-Shoulders Pattern

Currency movements occurring on Forex are captured and translated by means of charts and other tools. The collected information is going to be analyzed technically and enframed within a certain pattern. Traders strategically plan their next move on the currency market basing their decisions on results derived from charts. The formations of such charts are selected according to their relevance and significance to the current trend of the currency that underlies it. The end of a trend is signaled by means of formations known as reversal patterns. An underlying currency trend is confirmed to be intact through chart formations called continuation patterns.

The article will restrict itself to a more general presentation of trend reversal patterns. The most significant types of such category of patterns are:

head-and-shoulders and inverse head-and-shoulders;
double tops and double bottoms;
triple tops and triple bottoms.

In the following lines, the text is going to linger around the first reversal pattern, that is the one named head-and-shoulders. It is one of the most trustworthy and reliable chart formations. It is made of three consecutive rallies. The first and the last rallies (called shoulders) are of the about same height, whereas the second rally is the highest and is known as the head. The same support line serves as the basis of all three rallies and it is named the neckline.

The neckline is studied within several points, out of which the first is called the starting point. Prior to the earlier mentioned one, the neckline is a resistance line. The breaking of a resistance line results in the emergence of a significant support line. The points that follow the starting one study and render the bounce movements of price. Under a heavy volume, the neckline is broken and, consequently, the trend reversal is confirmed. The retesting of the neckline is done by means of a retracement, with the condition that the support line is broken.

The head-and-shoulders formation is useful as it generates important signals for traders. One such formation provides the following information:

the support line;
the resistance line;
the price direction;
the price target.

Scandalli Accordion

Saturday, September 17, 2011

Three Hairstyles For Male Pattern Baldness

Most men lose hair as they age. I certainly have and so you probably have too. Worse yet, it's progressive; you keep losing more hair as time goes on. Most men wish they had they hair and youth back, but fortunately it's not the most important thing and there are solutions.

There are natural solutions such as herbs that may help and have been used for centuries, medical solutions including medications and surgery, and all matter of quackery that probably does absolutely nothing! There are plenty of scams that will only relieve you of your money but that do not grow hair.

The easiest solutions have to do with hairstyles. Just arranging your hair, or lack or it, in a pleasing way that works for you.

The first idea, for those with moderate or beginning hair loss, is simply to grow your hair longer. You may also have it arranged to obscure your thinning hair. I'm not advocate severe comb overs, which look horrible on most men, but talk to your stylist or barber.

The second approach is short hair. Hey, you are an adult male and losing hair is very masculine. It's caused by testosterone after all. Many balding men look great with short hair, for example a number 2 or 3 buzz cut. You are not a little boy and you don't need to look like one.

Approach three is very fashion lately and is the total head shave. Not all men look great totally bald, but women think many of us do. It's an option to consider and most men should probably give it a try.

Scandalli Accordion

Friday, September 16, 2011

Stained Glass Pattern Making

Stained Glass is one of many dying arts. However it is making a come back. Designs can be traditional, modern, abstract or realistic. Learn how to create your own designs for stained glass. The Do's and Don'ts, and what needs to be considered when drawing up a pattern. Leaded or copper foil panels can be fitted directly into a wooden frame or enclosed within a double glazing unit, in effect triple glazing a window. Free Hanging pieces can also be made, such as Sun-catchers, mirrors, wall decorations, clocks, candle holders, and many more.

Before you start a pattern it is a good idea to be aware of some of the restrictions that are specific to working with glass in either the leaded or copper foil methods. When your pattern is complete, and ready to be made feel free to contact me via my website details of which can be found at the end of the article

Try to avoid a cross roads (X) or lines that go straight across from one side to another in your pattern especially for copper foil as this would be a weak point in the finished piece. (this is not so important for lead work, and many traditional patterns do include these shapes, but it is still better to be avoided if possible).

Try to avoid internal right angels (or sharper as in the letter V). as the glass would most likely crack spreading from the point of the right angle. Therefore there needs to be line running from any points (similar to the letter Y).

Try not to do a pattern with too much detail. This is especially important for leaded work as if the pieces of glass are too small, they will not be seen because of the lead. Think will the right glass add the detail for me.

The more detail there is, the larger the piece will need to be. This will not necessarily make the piece harder to make, unless it is very large, then handling the large sheets of glass can just make it plain awkward.

Some of the pattern will be lost due to it being covered by the lead or copper foil (a larger amount will be lost when using lead than when using copper foil). the amount lost will depend on the thickness' used. For a piece A4 size, 8 or 10 mm lead is sufficient but thicker lead my be required for larger pieces, or for round the edge. Rather than detracting from the pattern, it can be a feature in a well planned pattern.

Things that you will need for pattern making include: Paper (lining paper is useful as if it gets wet when the piece is being made it will not disintegrate), tracing paper/acetate, pencil, marker pen, ruler, eraser, ruler and or tape measure depending on size. A true stained glass designer is able to create a pieces using a variety of methods. These include:

Creating a pattern to match existing panels or windows.
Creating a pattern from photo's.
Adapting existing patterns.
Working from an idea.

Before starting the pattern for a fitted piece the size needs to be determined, the best way to do this is to use 2 methods.

Measure the opening to tight fit (the are a behind the beading that the glass will fit into) across several points, height and width.
Place paper over the area and draw round the area of tight fit.

Using both of these methods ensures that the pattern will be the right size and shape (the opening may not be truly rectangular or square) Next it is a good idea to draw a line 5mm in from 2 sides (this allows for ease of fitting and a little bit of room for error when the piece is being made). straighten up the remaining 2 sides.The pattern can the be drawn within the interior lines.

Creating a pattern to match existing panels or windows

Is the place where the new stained glass piece going to go the same size as any existing ones? If so the easiest way to created a pattern would be with tracing paper, or to do a rubbing (as when you were a child doing leaf rubbings) If not:

Take photo's of the existing panels so that you know what you are working to.

Draw a grid to scale over both the photo and on the paper the pattern will be drawn on, (this could be simply 2 lines to divide into quarters, or a grid with more lines depending on the detail) this will help keep the pattern to scale and details of the pattern in place.

Keep in mind the new piece may not be the same shape and pattern details may need to be stretched or squashed

Start to draw the details of the pattern in, using the gridded photo for reference.

Creating a pattern from photos

Artistic licence may need to be used for colours, shapes and backgrounds.

Print out the photo as near to the size wanted as possible. If the photo can not be printed to the exact size. Draw a grid to scale over both the photo and on the paper the pattern will be drawn on, (this could be simply 2 lines to divide into quarters, or a grid with more lines depending on the detail) this will help keep the pattern to scale and details of the pattern in place.

look at the photo with a critical eye. What detail can be missed out (whether textured or patterned glass can add it, i.e. as for fur in an animal).

Trace over the lines that will be kept with a marker pen.

if the highlighted sections conform with the restrictions of working with glass, if not then add any extra lines that are needed, or alter shapes slightly.

When happy with the pattern trace over the altered image and the pattern is finished.

Adapting existing patterns

Pattern books can be very useful but there may be certain aspects of a pattern that you don't like, or may just want to alter. This may be especially true for free hanging pieces as the shape can be altered by missing out sections from the edges, or interest added by missing bits out from the middle (try not to weaken the piece make sure that each bit has at least 2 points of contact). Alternatively extra pieces can be added for greater detail or interest.

Photo copy or trace the pattern
Place tracing paper over the pattern and draw over the aspects that are wanted, and changing any details that are required.

Working from an idea (this needs the greatest amount of drawing skill)

It may be a very detailed and specific idea (I like the view from my garden which includes a view of Criffel, with the trees and the fields) or vague (i.e. I like hills and sunsets). In the first instance it would be advisable to take a photo to work from. Whereas in the second instance a little more questioning may be required (do you live close to a specific hill that might have inspired you, if so then it could be advisable to include the shape of the hill, if not just a general hill shape may be fine to use.

If the piece is a fitted piece follow the guideline lines mentioned earlier. For free hanging decide on the size.

Roughly sketch out the design, until you are happy with the way it looks

View the design with a critical eye to see if the design fits in with the restrictions. Asking a 2nd person to view the design (telling them what is needed) can be a good idea, as aspects can often be missed.

Alter anything that needs to be altered.

Scandalli Accordion

Thursday, September 15, 2011

Crochet a Free Crochet Hat Pattern

It's National Sewing month in September. Just because it's sewing month, you shouldn't forget about crocheting. You don't have to keep your mind on sewing, so crochet something nice. I'm always on the lookout for free crochet patterns, sometimes I don't have much luck, but you can always find something online.

I love flowers and I love the way they smell. I thought to myself one day, why not find some free crochet flower patterns. It's perfect. If I crochet a flower it will never wilt or die. We have many crochet flower patterns to share.

Free crochet flower hat patterns can also be found on our site. My grandma always used to make free crochet patterns for herself, friends and family. I have a hat that she made with a ball on top. It's my winter hat that I adore so much. I remember she made this really neat crochet flower hat pattern for one of my sisters. It was a brown hat with light blue yarn for the flower. I was jealous she got the cool hat and I only got the plain brown one.

Did you know that you can crochet flowers themselves? I'm getting married next summer and I'm trying to save money. I've come to realization that flowers are going to be one of the most expensive things for the wedding. I came across a free crochet flower pattern and I fell in love with it right away. It looked just like a bouquet of regular flowers except they were made with yarn. I wouldn't have to worry about the travel for the flowers either, if they fall over it's ok. Water won't fall out of a vase and they won't break. This may be the newest invention no one has heard of yet.

The flowers I was planning on using for my wedding were Gerber Daisies. They just have a fun shape and beautiful bright colors. I learned I can create my own crochet daisy bouquet. It'll never be as great as my grandma's crochet flower hat pattern, but it will still be beautiful. Just picturing what the whole day will look like makes me smile.

I'm not sure if there's a National Crochet month, but if not, there should be. Start crocheting all your beautiful patterns now. Get ahead of the game and crochet some nice things for Christmas gifts, you'll be glad you did. And don't forget about all the free crochet flower patterns we have to offer.

Do something nice for yourself or for others. Crochet a beautiful piece and send it to a charity. This will make you feel good about yourself and it will help somebody out. Crochet an Afghan to keep a baby warm, you can find patterns on our site. Free crochet flower hat patterns would look adorable on a little boy or girl. Crochet hats are always nice to have for the winter time, especially this winter. The way the weather has been who knows what kind of winter we're going to have. So start crocheting those patterns.

Scandalli Accordion

Wednesday, September 14, 2011

How to Read a Knitting Pattern With Multiple Colors of Yarn

Reading a Knitting Pattern with Multiple Colors

If you see various colors in the photo of a knitting pattern, the pattern might call for at least one ball of yarn for each color. (There are exceptions, and I'll talk about them later.)

The confirmation is in the Materials section of the header of the knitting pattern. You might see something like the following:

A: Black - 1 ball
B: Red - 1 ball

In this example, A refers to Color A, the first color, the color that is probably used most, and B refers to Color B, or the second color.

The two colors might also be called:

MC and CC (for Main and Contrasting colors)
MC and CA (for Main and Color A)
CA and CB (for Color A and Color B)

Yes, pattern writers will say what they want - there are no standards. But the list above covers most cases.

Of course, if there are more than two colors, then the list of letters will get larger.

MC, CA, CB, CC, CD would be for a main color with 4 different contrasting colors.
A, B, C, D, E would be for 5 colors. There is no hint as to which is used most.
The MC and CC combination is only used for 2 colors, a Main and a Contrasting color.

Color Choices

Of course, you do not need to follow the color choices as written by the pattern designer.

As an example, most Halloween projects feature black/white/orange - but maybe you want to create a black pumpkin with an orange mouth!

Otherwise, do what you want - let your own imagination shine through.

In the Instructions Section

The knitting pattern will usually have the word WITH before whatever color code letters are used. Examples:

Row 1: (RS). With MC, purl across.
Row 1: (RS). With A, K2. With B, K3. With A, K2.

The Exception: A Single Ball of Yarn with Multiple Colors

Years ago, if you saw a knitting pattern photo with lots of colors, you knew immediately that you would need balls of yarn in each of those colors.

These days, there is always the possibility that the pattern designer is taking advantage of one of the many multi-colored yarns that the manufacturers provide. They may be variegated, self-striping, or self-patterning. One type of yarn is especially designed for sock knitting, so that an interesting color pattern emerges as you are knitting.

You will know this to be the case when you see a reference to only one color in the Materials section of the header of the knitting pattern. And usually that will be a specific yarn. If you substitute yarns, you will likely not be able to duplicate the effect.

Scandalli Accordion

Tuesday, September 13, 2011

How to Fit a Sewing Pattern Without Altering the Original Pattern

Once you've purchased your sewing pattern, whether you've chosen to buy a paper pattern or you've printed it from the internet, you'll need to make sure it fits!

Most patterns will come in multiple sizes, all you need to do is cut the size you require. One top tip, is not to presume all sizing is the same, different manufacturers will use different sizing, the sizing may also be different depending on where the sewing pattern originated from, e.g. patterns from the UK will have different sizing to those from the USA. So make sure you check the measurements rather than the actual size.

However, it's more than likely that the sewing pattern will not fit you straight away, this is simply because the patterns are based on average measurements, and most people do not fit into the average measurements bracket.

To fit a sewing pattern without doing and major pattern alterations, check your measurements against the sizing guide and choose one size larger overall than you need. Cut the pattern to this size.

You'll now need to purchase a cheap fabric such as muslin. Cut the fabric to the pattern directions, and pin the edges in place, and baste together. This is should be done quite quickly and loosely.

Next try on the muslin garment; you'll be able to see where the garment doesn't fit. With the help of a friend (or using a tailors bust that is your size), work your way around the seams of the garment, pinning them in closer to the body where they need to be adjusted. You may also need to adjust any darts. When you are happy, remove the garment and draw lines on the muslin where you've just pinned.

Open out the garment and remove all the pins and basting. You should now be left with a fabric sewing pattern that has additional lines. Noting what the seam allowance is based on the original pattern; add the seam allowances to the lines you have drawn on the fabric. Trim off any excess.

You may at this point wish to re-baste everything back together and try it on again, but this is optional and will require extra time.

Next use the fabric pattern instead of your paper pattern to cut the main fabric and stitch the pieces together permanently as directing in the instructions included with your pattern. Your pattern should now be a much better fit.

Of course this method is a body forming fitting process, and requires no direct alteration to the original sewing pattern. But if you are confident with pattern alterations, you may prefer to alter the original pattern rather than relying on this method as it may provide better results faster if done correctly.

Scandalli Accordion

Sunday, September 11, 2011

Male Pattern Hair Loss, Causes Behind It and Treatment Options

Male Pattern Baldness is a nightmare for all men around the world. The reason for this is that the hair loss due to this condition is not reversible and is permanent.

Once a person starts losing hair and is diagnosed with male pattern baldness, there is nothing one can do except live with the fact that they are going bald and start treatments immediately to try and control the progress of the hair loss.

Male pattern baldness occurs in almost half the men below sixty years of age and in about two-thirds of men when they reach their mid sixties. In some cases it can occur as early as in the teenage years.

While there is no treatment yet that will stop the hair loss and regrow hair, the real cause behind this condition has now been understood quite clearly.

Scientists have now come to a conclusion that male pattern baldness is the result of the action of the male sex hormone Di-hydrotestosterone or DHT on the hair follicles which causes the follicles to shrink and eventually die, producing no hair at all. DHT is synthesized by the enzyme 5 alpha reductase. When this DHT binds to the hair receptors, it causes the follicles to shrink in size and produce thinner hair over time.

It should be noted that DHT is present in the scalp of all normal men, but for men with the baldness gene, the hair follicles are sensitive to DHT.

It is therefore quite logical that the only way to combat the effects of male pattern baldness is to cut down the production of DHT or in other words, control the secretion and synthesis of DHT by 5-a-reductase.

There are two FDA approved treatments available for treating male pattern baldness; Minoxidil and Finasteride.

Although they do not stop hair loss completely, they are quite effective in controlling and in some cases even reversing hair loss. Finasteride was originally used as a treatment for prostate cancer but it later showed good results in treating pattern baldness. It works by blocking 5-a-reductase which converts testosterone to DHT. Finasteride is most effective in stopping the hair loss from progressing and has no effect in regrowing new hair. Another drug by the name of minoxidil does exactly this, that is it stimulates regrowth of hair. It works by increasing blood flow to the hair follicles thus promoting growth of stronger and healthier hair.

It should be noted that once these treatments have started, they should be used throughout ones lifetime or else whatever hair the drugs regrew will eventually fall out. It should also be noted that it can take up to 6 months to see any significant results.

Scandalli Accordion

Saturday, September 10, 2011

How to Develop a Pattern for Catching Bass - Part 2

Part 2 - Developing a Pattern Based On Seasonal Tendencies of Bass

By viewing pattern fishing from the seasonal tendencies of bass, you simplify finding and catching bass on any given day. You start with a simple pattern that may or may not have to be fine tuned for local conditions.

Winter:

Water is cold, even in central Arkansas. Water temperature is usually in the mid to upper 30's. Here comes that one day where air temps are in the 50's, you have been cooped up for a while and you want to go fishing. Where do I start and what lures do I use? Remember the general tendencies: During this period the bass are most lethargic. They tend to stay in one place and do not move far or fast to eat. The best bet is a large tributary or the main lake with areas having a fast descent into deep water. Vertical rock bluffs or steep banks with gravel or chunk rock on them. Try to pinpoint areas that have fallen trees or stumps along the slopes.

Fish slowly. Try slow rolling a 1 ounce spinnerbait, a pig and jig, a grub on a jig head, or a jigging spoon.

Prespawn:

Water temperature is in the mid to upper 50's. Bass are beginning to stage for spawning and males are starting to frequent bedding areas in order to find and build nests. Bass are foraging for food prior to the spawn. Starting spots will be humps, points at the mouth of a spawning cove and areas between the deep water and the spawning area.

During this period bass are reasonably active and feeding. Try chunking and winding a spinnerbait, burning a Rat-L-Trap, a Texas-rigged plastic worm or lizard, a jig and pig, a jerk baits or a Carolina-rigged lizard.

Spawn:

Largemouth Bass generally begin the spawn when water temperature reaches the high 60's or low 70's. The month or months vary widely depending on which region of the country you are in. The full moon has a drastic impact on this cycle also. Rule of thumb is that the spawn occurs 3 days before the full moon and last till 3 days following the full moon. The spawn may take place over a couple of months. Here on Lake Ouachita, where I reside, the bass spawn in waves in March, April and May. During this period, bass are concentrated in one spot - the beds. They only move to protect the bed or their eggs. They do not eat during this period but will strike baits that appear to be a threat to the nest or eggs.

You are going to be sight fishing for visible bass on beds in reasonably shallow water. The best baits are a Texas-rigged worm or lizard, Senko, slow rolling a spinnerbait, a gitzit, a tube or a jig and pig.

TIP: Be sure to wear your Polaroid sunglasses and you will be able to see the bass on the beds.

I personally am not in favor of fishing for bedding fish. That is my preference because the spawn is so important to the continuation of the species in our lakes. If you should catch a spawning big-bellied female, please release her after you have taken pictures.

Postspawn:

The male and female bass are now protecting the fry. The majority of the time the fry will be in a tight bundle and close to the surface. The adult bass will be close by protecting them. Postspawn ends when the protecting bass pass through the fry bundle eating some as they leave. This is a signal to the fry that they are now on their own and begins the Postspawn period. Now these adult bass have not eaten for several weeks and are looking for a quick, easy meal. Bass are going to be thin and lethargic. The key to fishing these bass will be to fish slowly but there are times when bass will want a fast retrieve.

The temperature is probably in the mid 70's. Bass will leave the spawning areas and hold on the first available area with deepwater access. This might be a ledge, a rip rap or a creek channel. Top water baits, deep-diving crank baits, waking a ¾ - 1 ounce spinnerbait, Texas-rigged worms, jerk baits and the Senko will work great.

Summer:

Water temperature has risen to the 80's. Many bass move offshore during summer and fan out over the body of water. These are widely known as "dog days." Bass will gain some weight and become more aggressive. They will begin to school and chase bait. As the summer continues, the techniques and patterns will change. You will have to figure out where the bass are and play with the various techniques until you figure out what patterns will work. When these changes occur is all dependent on the weather conditions.

Bass are going to be in 15 to 30+ feet of water. Fishing for suspended fish likely becomes the name of the game. One pattern that works in this type of circumstance is to slow roll a chatterbait in the suspended fish. The pattern Scott Suggs used to win the Forrest Wood Cup tournament on Lake Ouachita this last August was to slow roll a spinnerbait over the submerged trees, occasionally bumping the tree tops, in 30+ feet of water. Top water baits will work on schooling fish and Texas-rigged plastic worms will work on humps and ridges in 15+ feet of water. Your best bet is to fish very early, daylight to 9 or 10:00 o'clock and late in the evening 7:00 o'clock until and after dark.

Fall:

Water temperatures are dropping from the mid 70's. When the days begin to cool and water temperature is 75 degrees or below, bass become active and move to flats near the main river channel. These are often loaded with logs, brush or grass. Concentrate on small pockets near these flats. Bass will be very aggressive during this period and will feed heavily prior to moving to a deeper, slower winter pattern.

Bass will be very aggressive during this period and will feed heavily prior to moving to a deeper, slower winter pattern. Use faster baits in these conditions such as top water baits like the Pop-R and Zara Spook and Rat-L-Traps, buzzbaits, and mid to shallow running crank baits.

These are some of the ways to combine water temperature, time or seasons of the year and the general tendencies of the Largemouth Bass to develop a pattern for catching bass. These are very broad patterns and specific lakes, weather conditions and habitat will require you to refine these to a specific pattern. For instance, if you ever fish Grand Lake in Oklahoma, look for willow trees in the water, especially during postspawn and spring. You find willow trees in 4-5 feet of water you will catch bass regardless of what bait you use. If you fish the Ouachita River Basin in Louisiana, look for Cyprus tree or stumps with live vegetation growing out of the stump. Nine out 10 times when throw a worm or craw worm next to the stump, you will get bit.

I hope this article has answered some of your questions about patterning bass and has given you enough information to begin developing your own patterns for the lakes you fish. Keep a tight line and remember catch and release.

Scandalli Accordion

Friday, September 9, 2011

Male Pattern Baldness in Women - Learn How to Remedy This Type of Hair Loss Effectively

Male pattern baldness in women is on the increase, in part as more women become aware of this condition traditionally associated with men. Although it affects women differently, it can be very distressing but once you are aware of the main cause, finding a suitable remedy is much easier.

While men tend to get the familiar bald patch, women experience a gradual thinning all over and rarely get a receding hairline. It is usual to lose around a hundred hairs everyday but the problems start when they are not being replaced and as soon as you notice this you should seek out the most appropriate treatment.

The main underlying cause of male pattern baldness in women, often referred to as androgenic alopecia, is an excess of the hormone normally thought of as male as it's a by-product of testosterone - DHT.

The most effective solutions will be able to combat DHT and allow new healthy growth. Hair loss in women normally occurs after the menopause as the once high estrogen levels that kept the DHT levels low begin to decrease.

Some of the best ingredients to look for include Minoxidil, Horsetail herb extract, biotin, zinc and magnesium and these combined help to block DHT and help to build strong, healthy and shiny hair. In addition they provide a welcome boost to your immune system function and circulation.

Beware of any remedies promising fast results as they will never deliver!

It takes time to naturally regrow your hair due to the hair growing cycles so it is essential to be patient and taking pictures is often recommended so you can more easily track your progress and see new growth that you wouldn't otherwise notice.

Male pattern baldness in women can normally be treated very successfully once you know the right ingredients to use and the fact it will take some time to show the results.

Scandalli Accordion

Thursday, September 8, 2011

Female Pattern Baldness - How Minoxidil Helps With Female Pattern Baldness

Introduction

Androgenetic alopecia or female pattern baldness, affects over 30 million women today. But today women can take action to stop their hair loss and even re-grow their hair caused by female pattern baldness. The drug Minoxidil is the most effective drug on the market today that can stop the effects of female pattern baldness.

The drug discovered in the 1980s has proven to be very effective when applied to the scalp with a 2% solution.

So what is it and how does it work?

Minoxidil

Minoxidil was first used in the 1970s to help people control hypertension or high blood pressure. It was then discovered that people using Minoxidil to control their blood pressure, also grew hair in places where there was no hair.

Researchers decided to further study the effects Minoxidil had on re-growing hair. They took the drug Minoxidil and made a solution out of it. They then applied it to bald spots on men and women who were suffering from male or female pattern baldness.

They found that using the 2% solution of Minoxidil, applied directly to the bald spots, actually re-grew hair. In the 1990s the Federal Drug Administration approved Minoxidil for use by women to stop hair loss and re-grow hair caused by male and female pattern baldness.

This drug has been touted as being the closest thing yet to stopping female pattern baldness.

How Does It Work?

Though the exact method on how Minoxidil works is not fully known, we do know that it is classified as a vasodilator. A vasodilator is a drug that causes dilation of the blood vessels, thus more blood gets to the scalp and hair follicles. This allows for more nutrients and oxygen to be delivered.

It is believed that having more nutrients and oxygen being delivered to the hair follicles causes the follicles to come out of their resting phase and go into their growth cycle.

It is also believed that Minoxidil helps promote cell division particularly by the hair follicle. This then provides more protein, called keratin, to the hair strand.

If you have female pattern baldness, you are probably beyond menopause and have low estrogen levels. If this is your case, Minoxidil and estrogen supplements have been shown to work well together in preventing hair loss and re-growing hair.

Conclusion

Minoxidil is the only proven and effective way for women to stop hair loss and re-grow hair caused by female pattern baldness.

Scandalli Accordion

Wednesday, September 7, 2011

Antique Lamps - A Greek Subject Lamp of Gods and Men

"Classical Greece", meaning, authoritative: of recognized authority or excellence; "the definitive work on Greece"; or, relating to the most highly developed stage of an earlier civilization and its culture.

This interpretation of the term "classic" clearly defines the Greece of 500 BC, which has constantly re-inspired the Western world. The well known Athenian Acropolis, the temple to Athena, being a perfect example of classical Greek architecture.

At various periods thought history, revivals of the superb designs of Greek classicism have emerged in art and design and particularly, architecture. Architectural styles have been inspired by elements of ancient Greek temples, with the use of massive marble Corinthian and Doric columns, decorative friezes and grand stair cases. These revisits are generally known today as periods of "Greek Revival". These movements were dominant from about the middle of the 18th century, lasting, almost until the close of the 19th century, 1750 - 1890.

When speaking of design and the visual arts, the neoclassical movement, or the turning back to the classic, can be dated to about c1765 with its introduction generally seen as a reaction to the restraints of the former styles of the Baroque and Rococo, both of which were heavy with form and ornamentation.

The neo classical style can be seen as a desire to go back to the perceived purity and clean lines of ancient Greece. In France, this classical style became known as the style "Etruscan" and was much favored by the court of Louis XV and XVI.

From the late 18th century and up until about 1830 the style greatly influenced designers, peaking through the early years of the 19th century. Interior and furniture designers began to design and produce Greek style tables, chairs, wall hangings, pottery, silver and even coaches. These were all designed in the new classical Greek style, with simple lines and decorative elements drawn from the repertoire of Greco-Roman ornament, particularly from Greek vase painting and from classical architecture, i.e. architectural motifs such as the repetitive Greek key, palmettes and Acanthus leaf. The typical colour range of this neoclassic revival included black motifs outlined against terra cotta and Pompeian red, powder blue, puce and olive, these colours sometimes used in a single decorative scheme.

With the exception of porcelain and pottery of the period, when we see these colours today, they appear as pastels. We forget that these objects have been exposed to over 200 years of sunlight with original interiors having long since faded.

From about 1800, European archeology was "discovering" ancient Greece, with new design elements being literally brought to the surface! In 1806, Lord Elgin transported architectural elements of the Parthenon from Athens to London; events like this having the effect of lifting neoclassicism to new heights. Many artists were now taking the path to Greece and a steady flow of sketches and engravings were now making their way north.

The style swept across Europe, now variously known in France, as the Neo-Grec and Empire style, in England as the Regency style and in Russia as Empire style, with its influence felt not only in architecture and design, but in literature, theatre and music.

The Greek revival had a profound influence on architecture, an influence which lasted well into the 19th century. In fact, it was not until the 1840's that the term "Greek Revival" was used, believing to have been first used by Charles Cockerell, Professor of Architecture, in a lecture delivered to the Royal Society in 1842.

The style lasted well into the 1860's, especially in North America. The revival saw the construction of many banks, courthouses and other large public buildings including private houses designed on the grand scale. From an architectural perspective, it was held to reflect intellect, prosperity and stability, with the use of grand porticos supported by stately columns, reminiscent of Greek temples.

With the decorative arts, the revival was again strengthened in the 1860-1870 period. At this date, of course, we are talking of the high Victorian period, with design now characterised by a Victorian robustness. Throughout this late revival decade, art and design again swung toward the neoclassical, although this time without the early 19th century slenderness and elegant fine lines.

This article is illustrated with a French lamp from the late revival period and includes its formal description -:

A very rare, French, 19th century, black matte glazed, terra cotta lamp decorated with a classical Greek subject. The lamp derived from the style of the Bucchero, Etruscan, terra cotta vases of classical Greek antiquity, circa 500 B.C. These vases, characteristically painted with highly glazed black figures on a grey-black ground.

The lamp of amphora shape, an oval body with a narrow neck and curved handles. The amphora supported on a short socle and standing on a circular base. This shape was introduced by the "Bucchero potter", Nikosthenes in about 530 B.C

The subject of the decoration, Triptolemus, the legendary mortal of Greek mythology, much favoured by the gods. Demeter, goddess of agriculture, consecrates Triptolemus, the son of Celeus, "King of Eleusis". Demeter, with her daughter, Persephone, Goddess of Spring Growth, instructing him in the art of agriculture. From Triptolemus the rest of Greece learned to plant and reap crops.

Triptolemus flew across the land in a winged chariot, a gift of the goddesses, to complete his mission. The decoration with highly glazed black figures,shows Triptolemus seated in his winged chariot and holding his attribute, a sceptre of ears of corn, the goddess Demeter passing him implements of agriculture.

The reverse side of the lamp decorated with Demeter, the grain and fertility goddess and Persephone, goddess of Spring growth and Queen of the underworld, the goddesses holding Eleusinian torches and sheaves of wheat. Demeter shown standing by her altar, within the temple, built in her honour by Triptolemus.

The lamp standing on a custom made stepped, circular, gold plated, bronze base, the base rim enamelled in black. The lamp cap of custom made, gold plated bronze.

Circa 1865 Overall height including shade 23"/58.5cm

The lamp produced in Greek Etruscan style, with a black matte ground selectively polished to produce the classical Greek subject. This example also demonstrates the attention to detail and quality of workmanship of this Victorian expansionist period.

The descriptive term, "neoclassical" giving way to the term "Greek revival" and accepted as being prominent from c1765 - c1870, saw the rebirth of classical Greek architectural elements, extending into the decorative arts, interior design, literature and music.

This elegant, fine lined style has never been surpassed and is constantly revisited by every aspect of design, architectural, interior design and fashion.

Scandalli Accordion

Tuesday, September 6, 2011

How to Make a Pattern Copier For Your Woodworking Lathe

Lathe pattern copiers are expensive and are not available for many wood lathes. Pattern copiers are used to make duplicate turned spindles from an original. Here's how to make your own.

You will need a piece of 1/2 aluminum tubing as long as your lathe bed or a bit longer to make your lathe pattern copier. You will also need some 1/8" thick aluminum sheeting or you can buy some aluminum cookie sheets. Purchase a box of 10-40 bolts 1 1/2" long and a wing nut and washer for every bolt. Buy a second box of 10-40 bolts 1" long with nylon-lined lock nuts for every bolt. You will need (4) 3" angle irons with screws, as well. The rest of the parts for your lathe pattern copier can be made out of any scrap wood you may have laying around the shop.

The design of this lathe pattern copier incorporates multiple feeler "fingers" suspended behind the lathe along the aluminum pipe. These fingers are adjusted to match the exact depth of the cuts in your original turned spindle. When you place a new spindle blank on the lathe, all of the lathe pattern copier fingers you adjusted will be laying on top of the blank. As you cut into the blank, prepare yourself to stop cutting as soon as the fingers relating to that cut drop down and through the cut.

Make two, vertical support posts about 6" higher than the top of the largest spindle blank you can turn on that lathe. Note the outside diameter of the aluminum pipe and drill a hole of that size near the top of each support post. Mount the posts using the angle irons on the lathe table immediately behind the lathe. Insert the pipe through both holes to make sure it fits.This will help position the aluminum fingers of your lathe pattern copier so that they can reach the spindle you are turning.

Make a bunch of wood blocks 3/4" x 1¼" x 6" long. Drill a pipe sized hole in one end of each of them through the ¾" thickness. With the blocks lying flat, cut through from the end into the hole with a 1/8" table saw blade. With the blocks standing on edge, drill completely through each block between the hole and the end of the block. Use a drill diameter slightly larger that the shaft diameter of the 10-40 bolts. Insert one 1 ½" 10-40 bolt through the hole you just drilled and place a wing nut and washer on the end. The idea is that the wooden blocks will slip onto the pipe and the bolts and wing nuts will hold them in place by closing up the 1/8" cut you made on the table saw.

Drill another bolt hole of the same diameter about 1/2" from the other end of the block, centered with the block laying flat on the drill press table. Cut another 1/8" slot, 1" deep and centered through the 1¼" dimension, at right angle to the bolt hole. Remove one end of the pipe from the vertical support posts. You can now mount the blocks along the pipe before replacing the pipe in the vertical support post of your lathe pattern copier.

Cut aluminum fingers out of the flat stock using a 1/4" blade on the band saw. The fingers should measure 6" long and 3/4" wide. Both ends should be completely rounded (3/8" radius) on an edge, belt or disc sander. Drill a 10-40 bolt hole in one end of each finger centered 1/2" from the end. Sand the fingers smooth, removing saw marks and burrs.

Mount the aluminum fingers onto the ends of the wooden blocks, securing them in place with the 1" 10-40 bolts and lock nuts. The aluminum fingers must be free to move up and down.

Now place your original spindle on the lathe. Set the fingers to just drop through, barely touching the depth of each cut. Place the first blank on the lathe with the fingers you just adjusted resting on top of the spinning blank. Start cutting and stop as each finger falls through.

Bob Gillespie

Woodworker

©2010 Robert M. Gillespie, Jr.

Scandalli Accordion

Sunday, September 4, 2011

Famous Scottish Pattern

When you are thinking about Scotland and Scottish people what is the first thing that appears in your mind? Probably beautiful landscape, bagpipes, blankets, kilts. But did you ever wonder that there is something even smaller but known and used on the whole world? It's a pattern that is known as tartan.

Tartan is connected inseparably with Celtic culture, especially with Scottish one. This striped pattern is existing in this culture from 3rd century. But some scientists say that it is even older and tartan as a material was invented thousands years ago. In North America it is known as plaid but in Scotland it usually means a tartan cloth, a blanket or one of wool blankets in a tartan pattern.

The name of it probably comes from french word 'tiretaine' and back then referred to a part wool, part linen material. The first time when it was concerned more as pattern than a material was in XVII century. It got also special meaning the next century when the great battle of Culloden happened. In this century the myth that each clan has its own pattern became alive. Before that, the government force of the Highland Independent Companies introduced a standardised tartan chosen to avoid association with any particular clan. After the battle the habit of wearing tartan was banned in order to stamp out the rebellious culture of the Scottish highlands. Tartans weren't banned only for militaries. The company that become well known from producing the tartan not only for military was William Wilson. The mass production of tartan led to a wide supply of consistent patterns, and idea to name the patterns after Scottish towns. This led to the notion that the tartan designs belonged to certain parts of the land.

Nowadays tartans are registered by clans, families, institutions. They usually vary in amount of stripes and colours, but the pattern is always the same: crisscrossed horizontal and vertical bands.

Also the pattern has great usage in world fashion on the highest level. Famous people likes to be seen in tartan clothes. Not only in classic colours but in pink perhaps. Celebrities like Paris Hilton and Victoria Beckham wore a more up-to-date version of the old mini- a knee-length tartan pencil skirt. And they looked great! And every time when the "Braveheart" is on TV the kilt hire UK is increasing. Many people want to look like Mel Gibson in its tartan kilt. Of course, the truth is that if it comes to fashion it is a matter of taste. And some people don't like tartan clothes and in many cases they think that this is to Celdish wear. Usually make funny of tartan trousers in a women version. But I'm sure they wouldn't have anything against delicate long or short dress in tartan pattern. And those people are usually OK with men in kilts, not thinking about this piece of clothes as a skirt but even more important piece of cloth than trousers (not only Mel Gibson's fans).

Still tartan is recognized as a specific Scottish element. When Christmas is close shops are usually full of stuff with this pattern. And the most popular Scottish gifts are tartan ties-for him, tartan scarves-for her, and of course kilts-not only for adult one. Tartan kilt is also a great present to surprise a child. Especially if it loves Celtic culture and myths. Having a few things with tartan pattern will easily bring back the Scottish culture and history.

Scandalli Accordion

Saturday, September 3, 2011

Breaking Your Relationship Pattern, Part 4

Finally, after all of the hard work you have done completing your past, here is a way to break your relationship pattern.

Relationship choices are often based on patterns created in our childhood. These patterns are automatic and subliminal. We believe ours is the way relationships ought to be.

There is no problem having a pattern that leads you to loving, satisfying, long-term relationships. However, many people have patterns that cause them nothing but the heartache of unsuccessful relationships.

There is a way out, a way for you to be free of your particular pattern and to be free to make your relationship choices based on what you need and want. The best way is to understand where your relationship pattern comes from. Then you can consciously choose what works for you and what doesn't, what you want to continue and what you want to stop, and how you want your next relationship to be.

Below is a powerful exercise. In doing this exercise, you will discover information about your relationships and yourself. Knowledge of yourself is freedom to choose, freedom to act differently, freedom to have what you want.

Pattern Tracker©

Section 1. Instructions: Answer the following question for all of your significant past relationships. Significant means you had or still have strong feelings about the person. Go backwards in your history, starting with the most recent relationship. Write down your answers.


What hurtful things did your partner do in your last relationship?

What hurtful things did your partner do in the relationship before that?

What about the relationship before that?

Section 2. Instructions: Answer the following questions and write down your answers.


What hurtful things did your parent of the opposite sex do to his/her partner?

What hurtful things did your parent of the same sex do to his/her partner?

What hurtful things did your parent of the opposite sex do to you?

What hurtful things did your parent of the same sex do to you?

Section 3. Instructions: You will need to refer to your responses from the previous two sections. To make answering the following questions easier, you may want to copy out those responses. Write down your answers.


What are the similarities between the hurtful behaviors of your parents and your past partners?

Are the behaviors opposite?

Section 4. Instructions: Answer the following questions, writing down your answers.


Your parents' relationship with each other and with you is the basis for your relationship pattern. What kinds of pattern were you programmed to have in your intimate relationship?

Are you repeating your parents' relationship pattern in your own relationships?

Are you reacting to your parents' relationship by doing the opposite of their pattern?

Example: (Names and details changed to preserve privacy)

When my client Sonya did this exercise, she filled out Section 1 by listing all three of her significant relationship partners as unavailable and uninterested. Her most recent partner, Jeff, lives in New York, while she lives in Boston. He was barely making time for her. They were only seeing each other once a month and even then he would find reasons to be away from her. He was very argumentative and would never be the one to say he was sorry.

Her previous partner, Ronald, simply did not want to continue in their relationship. Every time something would go wrong, he would back away a little bit more until there was no longer a relationship. Sonya wrote down that Ronald was unavailable because he was unable to be emotionally close. He was also uninterested -- he did eventually walk away from the relationship. This man was not argumentative, instead avoiding arguments at all cost.

Sonya's very first significant partner, Rob, was the love of her life. They loved each other deeply, but even that did not keep them together or prevent him from doing hurtful things. As the relationship progressed he started to withdraw more and more. Eventually he lost interest in her physically. They tried to work it out, but he would shy away from confrontation and nothing ever got resolved.

Here is Sonya's Section 1:


Jeff was unavailable, uninterested and argumentative.

Ronald was unavailable and uninterested, and avoided confrontation.

Rob was withdrawn, uninterested, and avoided confrontation.

Sonya had to think hard about Section 2. She did not want to blame her parents or make them look bad. But as she thought about their relationship with each other and with her, she began to see some patterns.

She remembered her parents arguing often. Her mother felt the father did not care, did not want her, and did not participate in the relationship or the family. Sonya also remembered that her mother was the one who started these arguments and did the yelling, while her father first listened and then walked away.

Sonya's father did not spend much time with her, but was a good financial support. When her father eventually left, he did not stay in touch. Her mother told her over and over how all men eventually lose interest and leave.

Here is what Sonya wrote for section 2:


Father unavailable, uninterested and avoided confrontation.

Mother argumentative and blaming.

Father not around for me, not wanting me, leaving eventually.

Mother told me all men lose interest and leave.

When it came to Section 3, Sonya copied out the responses from the previous sections. She came up with the following list:


Jeff was unavailable, uninterested and argumentative.

Ronald was unavailable and uninterested, and avoided confrontation.

Rob was withdrawn, uninterested, and avoided confrontation.

Father unavailable, uninterested and avoided confrontation.

Mother argumentative and blaming.

Father not around for me, not wanting me, leaving eventually.

Mother told me all men lose interest and leave.

In answering the question, "What are the similarities between the hurtful behaviors of your parents and your past partners?" she noticed many similarities. For example, she noticed that all of the men, with whom she has had a significant relationship, ended up treating her the way her father treated both her and her mother. Sonya also noticed with a gasp that all of her relationships have fulfilled her mother's prophecy.

In answering the question, "Are the behaviors opposite?", she noticed that Jeff, her most recent relationship partner, was argumentative. In this way he was the opposite of her father and more like her mother.

Here is Sonya's Section 3:


Father unavailable to me and mother; I find men who are not available.

Father was uninterested in mother and me; I find men who lose interest in me.

Father avoided confrontation; two of the three relationships were with men who avoid confrontation.

Father left; I attract men who eventually leave. And mother told me they would.

A man who is argumentative is the opposite of my father, but just like my mother.

Finally, Sonya came to Section 4. What kind of a relationship pattern was she programmed for? The answered seemed obvious: exactly the kind of pattern she has been living out, where the men with whom she's in a relationship become unavailable, lose interest and eventually leave. She is programmed to have relationships that are domed to fail because she is with partners who cannot work through the relationship for fear of confrontation.

She had to answer "yes" when asked if she was repeating her parents' relationship pattern in her own relationships. She also had to answer "yes" when asked whether she was doing the opposite of her parents. And she realized that doing the opposite got her the same exact result.

Here is Sonya's Section 4:


I was programmed to have a relationship pattern where my partner will become unavailable, losing interest in me and eventually leaving.

I am exactly repeating the pattern in my parents' relationship.

Sometimes I have done the opposite of my parents' relationship, but got exactly the same result.

If you do the exercise yourself, I'm certain you'll have some great realizations, perhaps even a sense of relief. You will better understand why you attract and are attracted to certain kinds of partners. You will understand your relationship pattern. And in understanding your pattern, you will be able to break it and break free.

Your Relationship Coach,

Rinatta Paries

www.WhatItTakes.com

Scandalli Accordion

Friday, September 2, 2011

Pattern Day Trader - Want To Become A Successful Day Trader?

Forex market is a dynamic and versatile platform where interesting and unique concepts are always being welcomed by those marketers who are eager to learn how to be a successful pattern day trader. Usually, the events that happen within the stock market are only reflections of the attitudes and concepts of the people who are associated with the regular activities of Forex market. Now you may ask, what is pattern day trader? A pattern day trader is a person who avail the maximum advantage of market on a daily basis and he always buys and sells stocks on the same day. The trading concept is same, and it is buy low and sell high.

Being a smart and intelligent trader, it is really important to become a pattern day trader because it always reduces the risk of Forex trading.

Now, you should know what a pattern actually is. It is actually a set of repeated strategies that build a design. In origin, it can be both accidental and natural. But now the question comes in our mind is that why pattern is important in the Forex market. There are two factors which determine the price movement in any financial market, and those two factors are supply and demand, wherein these two factors jointly form the "order flow". If there are more selling orders in the market, automatically price will decline but when the buying orders are more, then automatically price will be increased. So the basic pattern is that we purchase at low prices in order to sell for higher prices, and sell at high prices to buy at lower prices.

There are many patters available in the Forex market such as flat top triangles, asymmetrical triangles, double tops and bottoms, flags etc...

Most of the patterns are daily pattern, and that is why a day trader can trade in the way of low risk high profit formation on a day-to-day basis.

An experienced pattern day trader can use two or three strategies but as a newcomer, it is recommended to start with one strategy and this is daily pattern strategy because it is the best way to become a successful pattern day trader.

Most of the people prefer to be a pattern day trader because it is basically a "get quick rich" scheme. A recent study proved there are approximately 8 million people in US, prefer to trade online as a pattern day trader.

Scandalli Accordion

Thursday, September 1, 2011

Bleeding Heart Stained Glass Pattern

Have you ever heard of the term "bleeding heart"? You may think of many things when you do, but this article isn't about liberals or suicide, it's about the famed bleeding heart stained glass pattern. If you've ever wondered the true origin of the words bleeding heart, you are in the right place.

The bleeding heart stained glass pattern originally comes from a flower. The dicentra genus has about 20 species of flowering plants native to Asia and North America. The name bleeding heart is used to describe many of the species, because of the flower that grows on the plant. The flower resembles the shape of a heart with a drop falling from it. These flowers are usually pink, red or white and although they may be different sizes, they are typically a small blossom. This flower is so lovely and strange that it inspired stained glass workers early in Victorian times to reproduce its image.

The very unique flower inspired many stories and folklore. Legends of a princess who wept for her prince and stories of unrequited love and suicide are often echoed when people see the flower. But the greatest thing the flower spawned is the bleeding heart stained glass pattern. This pattern lived through hundreds of years and is truly the legend worth remembering.

Floral patterns were always popular in Victorian stained glass art. No one is really sure who first started producing the bleeding heart stained glass pattern, but it shows up in many Victorian-era homes and is still popular today. The pattern might vary from one stained glass panel to the next. Often it resembles the flower very closely. Other times it is quite different, where the artist has used it as more of an abstract guide.

The bleeding heart stained glass pattern is a great pattern to use in your home. Its bright colors and unique shape are true to the Victorian-era stained glass trend. When you are shopping for stained glass, consider this unique and historically rich design. And when your friends ask about it, you can tell them all about the history of the true "bleeding heart".

Scandalli Accordion